Every motorcycle tire carries a size marking on its sidewall, such as 90/90-17. The three numbers tell you the width, the aspect ratio and the rim diameter — and getting them right is the first step to a safe fit.
What 90/90-17 means
- 90 — nominal section width in millimetres.
- 90 — aspect ratio: sidewall height is 90% of the width.
- 17 — rim diameter in inches.
Code sizes such as 3.00-17 work differently: the first number is the section width in inches, the second is the rim diameter. A 3.00-17 and a 90/90-17 are close in size but not identical — always match the size listed for your rim and model.
Load index and speed rating
After the size you will usually see two characters, for example 57P. The number is the load index (how much weight the tire can carry) and the letter is the speed rating. Never fit a tire with a lower load index or speed rating than the original equipment.
TT or TL?
TT means tube type: the tire needs an inner tube. TL means tubeless: the tire seals against a tubeless rim without a tube. A tube-type tire must never be mounted on a tubeless rim, and a tubeless tire needs a rim with good sealing.
How to match a replacement
- Read the size on your current sidewall.
- Check the owner’s manual for the recommended size and pressure.
- Match load index and speed rating, not just the size.
- Replace front and rear as a pair if the tread is worn unevenly.
ZHIXIN produces metric sizes from 80/90-10 to 150/60-18 and code sizes from 2.50-10 to 5.00-16. Browse the range or send your size list for a quotation.
